BJNBM - 9A, DRY FILM LUBRICANT; E750-675

  • MSDS: BJNBM
  • Manufacturer: SANDSTROM PRODUCTS COMPANY
  • Product Name: 9A, DRY FILM LUBRICANT; E750-675
  • National Stock Number: 9150-00-948-6912
Product Identification

Product ID:9A, DRY FILM LUBRICANT; E750-675
MSDS Date:03/21/1991
FSC:9150
NIIN:00-948-6912
MSDS Number: BJNBM

Responsible Party
SANDSTROM PRODUCTS COMPANY
224 SOUTH MAIN STREET
PORT BYRON, IL 61275-9501
US

Emergency Phone: 309-523-2121

Info Phone: 309-523-2121

Cage: 34227

Contractor
SANDSTROM PRODUCTS COMPANY
PORT BYRON, IL 61275 US

Telephone: 309-523-2121

Cage: 34227

Ingredients

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 5-10%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 15-20%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 25-30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TERPINEOL

CAS: 8006-39-1

RTECS: WZ6600000

Fraction By Weight: 1-5%


BASIC LEAD PHOSPHITE

CAS: 12141-20-7

Fraction By Weight: 1-5%


ANTIMONY TRIOXIDE (SARA III)

CAS: 1309-64-4

RTECS: CC5650000

Fraction By Weight: 5-10%

OSHA PEL 0.5 MG/M3 (SB)

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


MOLYBDENUM DISULFIDE

CAS: 1317-33-5

RTECS: QA4697000

Fraction By Weight: 10-15%


BISPHENOL A EPOXY RESIN

CAS: 25036-25-3

Fraction By Weight: 10-15%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:MODERATELY IRRITATING. MAY CAUSE
CORNEAL INJURY. SKIN:MODERATELY IRRITATING, POSSIBLE DAMAGE TO THE
SKIN. MAY RESULT IN DERMATITIS. INHALATION:IRRITATION TO THE NOSE,
THROAT, RESPIRATORY TRACT AN D OTHER MUCOUS MEMBRANES. MAY PRODUCE
CENTRAL NERVOUS SYSTEM DEPRESSION. BRAIN DAMAGE POSSIBLE.
INGESTION:TOXIC.
Effects of Overexposure:EYE, SKIN, RESPIRATORY AND GASTRO-INTESTINAL
TRACT IRRITATION. CENTRAL NERVOUS SYSTEM DEPRESSION RESULTING IN
HEADACHE, DIZZINESS, NAUSEA AND SYMPTOMS OF INTOXICATION. IN
EXTREME CASES, UNCONSCIOUSNES S AND DEATH. POSSIBLE LOSS OF
APPETITE,METALLIC TASTE IN THE MOUTH, ANXIETY, CONSTIPATION,
NAUSEA, TIREDNESS, AND COLIC
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE AND
RESPIRATORY DISORDERS. IMPAIRED CENTRAL NERVOUS SYSTEM FUNCTION AND
PRE-EXISTING DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.

First Aid

First Aid:EYES:FLUSH EYES WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MIN. WHILE HOLDING EYELIDS OPEN. SKIN:REMOVE CONTAMINATED CLOTHING.
WIPE EXCESS FROM SKIN AND FLUSH WITH WATER AND SOAP IF AVAILABLE.
INHA LATION:REMOVE VICTIM TO FRESH AIR AND TREAT SYMPTOMATICALLY.
PROVIDE OXYGEN OR ARTIFICIAL RESPIRATION IF NECESSARY. INGESTION:DO
NOT INDUCE VOMITING. CONSULT A PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:21.0F,-6.1C
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:CLEAR FIRE AREA OF UNPROTECTED PERSONNEL. DO
NOT ENTER CONFINED FIRE SPACE WITHOUT HELMET, FACE SHIELD, BUNKER
COAT, GLOVES, RUBBER BOOTS, BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:COOL EXPOSED CONTAINERS TO PREVENT HEAT
BUILDUP WHICH COULD RESULT IN RUPTURE.

Accidental Release

Spill Release Procedures:WEAR APPROPRIATE EQUIPMENT. SHUT OFF SOURCE OF
LEAK. DIKE AND CONTAIN. USE WATER FOG TO CONTAIN VAPORS. REMOVE
WITH VACUUM TRUCKS. SOAK UP RESIDUE WITH AN INERT ABSORBENT
MATERIAL. FLUSH AREA WITH WAT ER TO REMOVE RESIDUE. SEAL TIGHTLY
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP LIQUID AND VAPOR AWAY FROM HEAT,
SPARKS AND FLAMES. KEEP CONTAINERS CLOSED WHEN NOT IN USE. USE
ADEQUATE VENTILATION.
Other Precautions:CONTAINERS CAN CONTAIN HAZARDOUS RESIDUES EVEN WHEN
EMPTY.

Exposure Controls

Respiratory Protection:IF EXPOSURE EXCEEDS TLV, USE A NIOSH-APPROVED
RESPIRATOR TO PREVENT OVEREXPOSURE.
Ventilation:USE VENTILATION AS REQUIRED TO CONTROL VAPOR/DUST
CONCENTRATIONS.
Protective Gloves:AS APPROPRIATE TO AVOID SKIN CONTACT.
Eye Protection:GOGGLES.
Other Protective Equipment:EYE WASH FOUNTAINS AND SAFETY SHOWERS.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:F2
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER = 1)
Appearance and Odor:NOT SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:58.46

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS AND ALDEHYDES.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:REFER TO LATEST EPA OR STATE REGULATIONS
REGARDING PROPER DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.